Description PMAC Water Cooled motor, an Radial Air Gap, Permanent Magnet Synchronous Motor (PMSM) with an Internal Permanent Magnet Rotor (IPM) This has the same stator and rotor as the ME1507, but in a water cooled IP67 case. ME1616 PMAC Water Cooled motor 48 to 96 VDC battery systems Continuous current of 250 amps 7/8″ keyed Shaft Sine/Cosine Incoder Weight 56.2 Lbs (25.5kg) 120 NM peak torque with 600 Amps RMS Torque Constant 0.22 NM/Amp Info: Units Motenergy ME1616 Type PMAC Brushless Cooling Type Liquid Flow Rate Required liter per min 4-10 Voltage Volts Up to 96 Peak Current Amps 600 Continuous Current Amps 250 Max Rotor Speed rpm 6000 at 96V Torque (Peak Stall Torque) Ft Lbs 88 (120 Nm) Torque Constant Nm/Amp 0.22 Weight lbs 55 Height (Not Including Cable Connection Points) inches 10 Width inches 10 Length inches 7 Shaft Dimensions Inches 7/8, 1-11/16, 1/4 key Efficiency % 92 Poles 5 pole motor (10 magnets) Inductance between phases (@1000 Hz) micro Henry 62-110 Temperature Sensor Installed Yes Temperature Sensor PN KTY84-130 Sensor Type Sine-Cosine
